TwinridgeMold & Plastics双岭模塑

Mold design & manufacturing · China模具设计与制造 · 中国

Injection molds注塑模具and plastic parts与塑料制件

Twinridge works with product teams on custom housings, covers, and brackets. Order a mold for your own press, or request finished parts molded to your drawing.双岭模塑为产品研发团队定制外壳、盖板和支架。您可以单独订购模具,在自己的注塑机上生产,也可以提供图纸,直接采购注塑成品。

Close-up of a steel injection mold with guide posts and polished pins.

What do you need to buy?您想采购模具还是注塑件?

Tell us where the mold will run and how many parts you expect to order. A useful quote seperates tooling, samples, and production pricing, and gives a lead time for each stage.请告知模具将在哪台设备上使用,以及预计采购数量。报价时可分别列出模具费、打样费和量产单价,并注明各阶段的交期。

Black injection-molded plastic housings showing their openings, flanges, and mounting holes.

A mold for your press为现有注塑机配模

Send the recieving press specifications and any mold base or fitting standards your plant uses. We can then agree on mounting, cooling connections, spare inserts, and which drawings should travel with the tool.请提供注塑机规格,以及贵厂采用的模架和接头标准。双方据此确认安装方式、冷却水接头、备用镶件和随模交付的图纸。

Tooling and molded parts开模及注塑生产

Share the first order quantity and expected repeat orders. Ask for the one-time tool cost and the piece price at each quantity so you can compare the cost of one cavity with a multi-cavity option.请提供首批数量和预计返单量。模具费与不同批量的制件单价可分开核算,方便比较一模一穴和一模多穴方案的成本。

Changes to an existing part现有零件改型

Mark the change on the current drawing and tell us what must still fit. If you want to reuse a mold, include its drawings or photos so we can review whether an insert change is practical.请在现版图纸上标出改动位置,并注明哪些装配关系必须保留。如需沿用现有模具,请附模具图纸或照片,以便评估能否通过更换镶件完成改型。

Design review example设计评审实例

A two-piece electronics enclosure由上盖和底壳组成的电子外壳

For a lid and base that close around a circuit board, the assembly drawing is as useful as the individual part files. Here are three details worth settling before the mold is cut.当上盖和底壳需要合拢并固定电路板时,除了单件图纸,还需要装配图。以下三处细节建议在开模前确认。

Part feature零件特征Before cutting steel开模前确认What to check on samples样件检验要点
Lid and base上盖与底壳Mark the visible faces and specify the gap and step allowed at the seam.标明外观面,并注明接缝处允许的间隙和段差。Fasten the assembled housing and check the seam at the corners as well as along each edge.将上下壳装配并紧固,检查四角及各边接缝处的间隙和段差。
Screw bosses螺丝柱Identify the screw or insert and the outside face directly behind each boss.注明所用螺钉或螺纹嵌件的规格,并标出每个螺丝柱背面对应的外观面。Fit the specified fastener and inspect the outside wall for a visible depression, or sink mark.装入指定的紧固件,检查螺丝柱对应的外壁是否出现可见缩痕。
Connector opening连接器开口Locate the cutout from the board mounting points. Include the mating plug in the clearance check.以电路板安装孔为基准确定开口位置,核对配套插头所需的插拔空间。Install the board, close the cover, and confirm that the actual plug seats fully.装好电路板并合上外壳,用实际配套的插头试插,确认能完全插到位。

Sample approval样件确认与封样

Identify the drawing revision and resin grade used for the trial. Record any change against the sample it affects. Once fit, finish, and critical dimensions are accepted, keep an approved sample as the reference for repeat orders.记录试模所用的图纸版本和材料牌号,各项修改应对应到具体样件。装配、外观和关键尺寸确认合格后,保留签样,作为后续批次的验收依据。

Request a quote询价

Email a STEP model or a dimensioned PDF with the part number and revision. If the design is confidential, ask about an NDA before sharing the files.请通过邮件发送 STEP 模型或带尺寸标注的 PDF 图纸,并注明零件编号和版本。如涉及保密设计,可在发送文件前先洽谈签署保密协议。

Include with your drawing询价时请一并提供

  • First order quantity and estimated annual demand首批采购数量和预计年需求量
  • Resin grade, color, and finish, if specified已确定的材料牌号、颜色和表面处理要求
  • Critical dimensions, mating parts, and visible surfaces关键尺寸、配合件和外观面
  • Ship-to location and target date for samples or production收货地点,以及样件或量产件的期望交期

If the resin is still open, describe how the part will be used. A cover exposed to sunlight has different requirements from a bracket inside a cabinet.材料尚未确定时,请说明零件的使用环境。例如,长期受日晒的盖板与安装在机柜内部的支架,对材料的要求并不相同。